Virginia Applied Tip Powder Horns

Applied tip powder horns, as the name implies, have turned horn, antler, or bone tips that either screw onto or are pinned to the powder horn body.  These are professionally made horns that had turned butt plugs as well, and sometimes turned horn bands. Screw-tip powder horns were made as early as the French and Indian War in Philadelphia and spread west into Pennsylvania and south into Virginia and North Carolina.   The best supported explanation for the purpose of screw-tip powder horns, as presented by Art DeCamp, is that the turned screw-tips (and other applied tips ) allowed for the mass production of powder horns where each step of the manufacturing process could be handled by one person.    Turned horn bands and turned wood base plugs served the same purpose.   By turning all these parts,  a fancy powder horn could be made quickly by professional horners.

I performed all the steps myself for the screw-tip powder horns displayed below.   Each is an example of a Virginia screw-tip powder horn.   The single turned band is the defining feature of a Virginia powder horn.   The shape of the base plug is characteristic of powder horns from the middle portion of the Valley of Virginia.   As with most southern screw-tip powder horns, the screw-tips on the powder horns below have an internal thread.   The powder horn bodies have an external thread.  Both these horns have turned walnut stoppers.   Both screw-tips are dyed to match the base plugs and stoppers   The band on Horn #5 below is also dyed horn.   The base plug on Horn #5 is maple stained with aqua fortis.   The base plug on Horn #6 is walnut.   Both powder horns are stained with aqua fortis and aged.

I will make any banded, screw-tip powder horn, with a turned base plug like the ones shown here for $200 plus shipping. See FAQ for more information on ordering custom work.

Horn #5 - Outside curve of small Virginia screw-tip powder horn with single band.
Horn #5 - 13 1/2" outside curve , 2 1/4" dia. base plug
Horn #5 - Top of small Virginia  screw-tip powder horn with band.
Horn #5 - Top
top of single banded, screw-tip powder horn
Horn #6 - Top
Side view of single banded, screw-tip powder horn
Horn #6 - 15" outside curve , 2 3/4" dia. base plug
Horn 21 - A slightly different banded, screw-tip horn - 14 1/2" outside curve,  2 3/8" base plug
Horn 21 – A slightly different banded, screw-tip horn – 14 1/2″ outside curve, 2 3/8″ dia. base plug


Below is another kind of applied tip powder horn. This one is based on an early Virginia horn documented in Jay Hopkins book;
Bone Tipped & Banded Horns, Vol 1; pp. 138-9. This horn has a pinned turned antler tip. The butt plug and stopper are turned curly maple. The wood, horn, and antler were stained with aqua fortis (iron nitrate). The butt plug and tip were pinned with steel (iron on the original) wire pins.

Horn #20 - 16" outside curve, 13" tip to tip, 2.5&quot dia. butt plug
Horn #20 – 16″ outside curve, 13″ tip to tip, 2 1/2″ dia. butt plug

I will make a similar pinned tip horn with a turned base plug for $175 plus shipping. See FAQ for more information on ordering custom work.

If I can make a powder horn for you, use the Contact form to send me an e-mail.

Facebooktwittergoogle_plusredditpinterestlinkedinmail
Facebooktwittergoogle_pluslinkedinrss

One thought on “Virginia Applied Tip Powder Horns”

Leave a Reply

Your email address will not be published. Required fields are marked *