Two Fraktur Decorated Applied-tip Powder Horns

Small Fraktur Decorated Applied-Tip Powder Horn (#52)

Horn #52 - Small Fraktur engraved applied-tip powder horn- Top
Horn #52 – Small Fraktur engraved applied-tip powder horn- Top
Horn #52 - Small Fraktur engraved applied-tip powder horn- Bottom
Horn #52 – Small Fraktur engraved applied-tip powder horn- Bottom

This small fraktur engraved powder horn (#52) is a traditional left hand carry that can be carried either way.   It is approximately 13.5″ around the outside curve and 10″ tip to tip not including the stopper.   The Cherry base plug is 2.25″ in diameter.   The two piece applied-tip is made of horn and Axis deer antler.   The stopper is Black Walnut.   The horn was lightly stained with ferric nitrate and finished with Tried and True (linseed oil and beeswax).  The horn weighs a little over 6 oz.

The bespoke price for a horn like this would be $450.  Sales tax will be collected for Virginia residents and shipping would be between $20-$25.    If you would like a horn like this,  use the Contact page to let me know and mention Horn #52.

If you like this, perhaps you might be interested in some of my other fraktur such as my Birth/Baptismal/Marriage Certificates or paintings.

Horn #52 - Small Fraktur engraved applied-tip powder horn- Outside
Horn #52 – Small Fraktur engraved applied-tip powder horn- Outside
Horn #52 - Small Fraktur engraved applied-tip powder horn- Inside
Horn #52 – Small Fraktur engraved applied-tip powder horn- Inside

Medium Fraktur Decorated Banded Applied-tip Powder Horn (#53)

Horn #53 - Medium Banded, Fraktur engraved, applied-tip powder horn- Top
Horn #53 – Medium Banded, Fraktur engraved, applied-tip powder horn- Top
Horn #53 - Medium Banded, Fraktur engraved, applied-tip powder horn- Bottom
Horn #53 – Medium Banded, Fraktur engraved, applied-tip powder horn- Bottom

This larger banded fraktur engraved powder horn (#53)is also a traditional left hand carry that can be carried either way.   It is approximately 16″ around the outside curve and 12.75″ tip to tip not including the stopper.   The Cherry base plug is 2.6″ in diameter and hollowed out about 3/4 of its length.   The two piece applied-tip is made of horn and Axis deer antler.   The stopper is Black Walnut.   The horn was stained light yellow with ferric nitrate and finished with Tried and True (linseed oil and beeswax).  The horn weighs a little under 8 oz.

This horn is available for sale for $375 plus $25 shipping and insurance.  The bespoke price for a horn like this would be $475.  Sales tax will be collected for Virginia residents.  If you would like this horn,  use the Contact page to let me know and mention Horn #53.

If you like this, perhaps you might be interested in some of my other fraktur such as my Birth/Baptismal/Marriage Certificates or paintings.

Horn #53 - Medium Banded, Fraktur engraved, applied-tip powder horn- Outside
Horn #53 – Medium Banded, Fraktur engraved, applied-tip powder horn- Outside
Horn #53 - Medium Banded, Fraktur engraved, applied-tip powder horn- Inside
Horn #53 – Medium Banded, Fraktur engraved, applied-tip powder horn- Inside

Right or Left Hand Carry?

What is right or left hand carry?  Simply, it is the side of the body on which a horn is intended to be worn.  Historically,  a curve of the tip to the left as viewed from the top is a right hand carry horn and also from the right side of the cow.   A curve of the tip to the right would historically  be a left hand carry horn and from the left side of the cow.   If there is no significant curve of the horn as viewed from the top, then the horn can be easily worn on either side with no conflict.   Most horns have so little curve it really doesn’t matter much and the modern pattern of carry is frequently opposite of the historical pattern.

Carrying a horn on the same side of the body as it came from the cow results in the tip pointing toward the body and the base pointing away from the body.   I also like the base of the horn to point to ward the body, as do many modern wearers, so I usually use the opposite side horn and rotate it about 90 degrees so that both the tip and the base of the horn point into the body.    This makes a horn from the left side of the cow into a powder horn you can carry on the right side of the body.     This is my personal preference, but not generally historically correct.  Historically,  powder horns were usually carried on the same side of the body as they came from on the cow.   If you want to be completely historically correct,  you need to understand that.

Sometimes a horn that is technically a left hand horn might wrap around the body better on the right hand side and vice versa.    So,  in describing a horn,  I will tell you whether a horn is historically a left hand or a right hand.  Then I will tell you on which side the horn was built to be carried,  if it is different.    I will also try to include a photo from the top of the horn so you can see the curve for yourself.     On which side you actually carry a horn, that is up to you.

Fraktur Painted Blanket Chest

Given that my work fell off by about half this year due to the pandemic economic downturn,  I started to fill my time with personal projects.  This blanket chest has been on my personal project list for some time.    I finally got it finished.   This chest is approximately 50″ L x 24″ W x 28” H and is made up of six glued up pine panels.   It is assembled with hand cut dovetails.  The bottom, apron, and lid edges are all pegged in place.

The painted finish started with a deep red base of furniture paint.   That was then covered with a sponge applied black acrylic glaze.   The fraktur painted panels used acrylic gesso as a base.   The fraktur designs were painted in acrylic artist’s paints.

This item is not for sale and I do not intend to build another of this size.  However, I might be open to making a much smaller painted chest or box.  If you like this, perhaps you might be interested in some of my other fraktur such as my Birth/Baptismal/Marriage Certificates or paintings.

Early Virginia Powder Horn with Color Scrimshaw

Shown here is a bespoke powder horn with color scrimshaw.   The form of the horn is Early Virginia with a turned  beaded hard maple base plug and a turned Axis deer antler tip.  This right hand  horn is approximately 14.75″ around the outside curve, 12.25″ tip to tip, and with a 2.375″ diameter base plug.    Per the clients specification, the horn is engraved with a male and a female Cardinal, dogwood flowers, tobacco leaves and a cornucopia.   A little color was added to the birds.  The horn and base plug is stained with ferric nitrate and the entire horn finished in Tried & True (linseed oil and beeswax).

This horn is not available, but I can make you something like it.   Just contact me with your ideas and we can discuss it. The bespoke price for a horn like this one with a turned base plug and turned applied tip is $250.   Engraving is generally an extra $200.  Added color is $100.   Shipping on a single horn generally runs $20-$25.    Appropriate sales tax will be collected  for Virginia residents.

If you like this, perhaps you might be interested in some of my other fraktur such as my Birth/Baptismal/Marriage Certificates or paintings.

Horn #57 - Early VA Powder Horn with Color Scrimshaw showing a male Cardinal and dogwood flowers.
Horn #57 – Early VA Powder Horn with Color Scrimshaw showing a male Cardinal and dogwood flowers.

Horn #57 - Early VA Powder Horn with Color Scrimshaw showing a female Cardinal and a cornucopia.
Horn #57 – Early VA Powder Horn with Color Scrimshaw showing a female Cardinal and a cornucopia.

Right or Left Hand Carry?

What is right or left hand carry?  Simply, it is the side of the body on which a horn is intended to be worn.  Historically,  a curve of the tip to the left as viewed from the top is a right hand carry horn and also from the right side of the cow.   A curve of the tip to the right would historically  be a left hand carry horn and from the left side of the cow.   If there is no significant curve of the horn as viewed from the top, then the horn can be easily worn on either side with no conflict.   Most horns have so little curve it really doesn’t matter much and the modern pattern of carry is frequently opposite of the historical pattern.

Carrying a horn on the same side of the body as it came from the cow results in the tip pointing toward the body and the base pointing away from the body.   I also like the base of the horn to point to ward the body, as do many modern wearers, so I usually use the opposite side horn and rotate it about 90 degrees so that both the tip and the base of the horn point into the body.    This makes a horn from the left side of the cow into a powder horn you can carry on the right side of the body.     This is my personal preference, but not generally historically correct.  Historically,  powder horns were usually carried on the same side of the body as they came from on the cow.   If you want to be completely historically correct,  you need to understand that.

Sometimes a horn that is technically a left hand horn might wrap around the body better on the right hand side and vice versa.    So,  in describing a horn,  I will tell you whether a horn is historically a left hand or a right hand.  Then I will tell you on which side the horn was built to be carried,  if it is different.    I will also try to include a photo from the top of the horn so you can see the curve for yourself.     On which side you actually carry a horn, that is up to you.

Embroidered Diary Case/Shot Pouch

I decided to try my hand at the embroidered diary case/shot pouch on pages 34-37 of Jim Webb’s book on shot pouches and powder horns of Southern Appalachia. This is my interpretation of that bag.

I made a few changes.  I only put one extra layer of leather in the flap instead of the three of the original and only created one front pocket instead of the original two.   This reduced the number of layers of leather I had to sew through to a max of five.   I also used 2 oz veg tan cow hide instead of buckskin.   I used 6 oz veg tan cow hide for the strap.

It took a while to work out the pattern, but the shot pouch actually went together much easier than I expected. I cut out the leather very precisely making sure all the mating edges (and punched holes) lined up exactly. I punched all the holes for the embroidery and used my own design. Once the embroidery was done, I glued the pieces together along the edges using white glue. I think this was the key to being able to easily sew it all together; that and the precise matching of the holes.   In case you were wondering, the glue mostly dissolves away when the bag  was soaked in warm water to turn it.

The bag is stained with vinegar and iron. That was done right after the parts were cut out.  I like vinegar and iron because it is a traditional stain,  It stains through and doesn’t wash out.  I put a lot of Mink oil on the bag once it was all done and dried out.

By the way, the bag finished up a little under about 7″ x 7″.  The original was listed at 6 1/2″.

This bag with Horn #56 (shown below) is available with a small patch knife (not shown) attached to the strap for $845.   I am not charging for the knife.  The strap can be adjusted to a max of 56″ top of bag to top of bag.   The bespoke price for the pouch only is $550.  You would, of course,  get a different embroidery design on the flap if I were to make you one.   Priority Mail Shipping runs $20-$25 on outfits and I collect sales tax for VA residents.  Contact me if interested.

If you like this, perhaps you might be interested in some of my other fraktur such as my Birth/Baptismal/Marriage Certificates or paintings.

Pouch 48 - Embroidered Diary Case/Shot Pouch - Full
Pouch 48 – Embroidered Diary Case/Shot Pouch – Full

Pouch 48 - Embroidered Diary Case/Shot Pouch - Flap
Pouch 48 – Embroidered Diary Case/Shot Pouch – Flap

Pouch 48 - Embroidered Diary Case/Shot Pouch - Inside
Pouch 48 – Embroidered Diary Case/Shot Pouch – Inside

Pouch 48 - Embroidered Diary Case/Shot Pouch - Back
Pouch 48 – Embroidered Diary Case/Shot Pouch – Back

On someone’s recommendation,  I decided to add a little banded southern horn to this pouch.     It is a left hand horn that is fairly straight  and was intended from the beginning to be carried on the right side.  Actually all the horns on my personal outfits are left hand horns carried on the right.   I always thought that worked the best.   It was only later that I learned that, historically, left hand horns were generally carried on the left and right hand horns where generally carried on the right.   Of course,  I still carry a left hand horn on the right. 🙂

This horn (#56) is approximately 12″ around the outside curve, 10″ tip to tip (not including the stopper), with a base plug about 2.5″ in diameter.   The base plug is Cherry, the tip is Axis deer antler, and the stopper is Black Walnut.  The base plug is hollowed out about half it’s depth.

As stated above,  the asking price for this outfit with a small patchknife (not shown) attached to the strap  is $845.   Contact me if you are interested.

Pouch 48/ Horn 56 - Embroidered Diary Case/Shot Pouch with a small southern banded powder horn.
Pouch 48/ Horn 56 – Embroidered Diary Case/Shot Pouch with a small southern banded powder horn.

A Grandfather’s Gift – An Applied-tip Powder Horn with Color Fraktur Scrimshaw (Horn #49)

This traditional right hand powder horn was a gift from a grandfather to his four year old grandson.   He wanted a powder horn with my color fraktur scrimshaw that had his grandson’s name.   I kept the powder horn simple with a relatively plain domed cherry base plug with a finial and turned Axis deer antler tip.   The decoration was also intentionally minimal consisting of the name on the top of the powder horn where it is easily viewed with fraktur flowers and a heart wrapping around the rest of the horn.

The powder horn is 14″ around the outside curve and 11 1/4″ tip to tip not including the walnut stopper.   The base plug is 2 1/4″ in diameter.

Horn #49 - An applied-tip powder horn with color fraktur engraving of the owners name, flowers, and a heart - Outside
Horn #49 – An applied-tip powder horn with color fraktur engraving of the owners name, flowers, and a heart – Outside

Horn #49 - An applied-tip powder horn with color fraktur engraving of the owners name, flowers, and a heart - Bottom
Horn #49 – An applied-tip powder horn with color fraktur engraving of the owners name, flowers, and a heart – Bottom

the owners name, flowers, and a heart - Inside
the owners name, flowers, and a heart – Inside

the owners name, flowers, and a heart - Inside
the owners name, flowers, and a heart – Inside

the owners name, flowers, and a heart - Top
the owners name, flowers, and a heart – Top

The bespoke price for a simple applied-tip powder horn is $250.   Scrimshaw adds $200 and color adds another $100.   The availability of any particular style, size or carry side of powder horn depends on my stock of raw horns.  If you would like something like this powder horn,  use the Contact page to get in touch with me, and we can discuss making you a similar horn.

Shipping/insurance a  horn of this value is $25 .   VA residents will have to pay an additional 5.3%  to 7% sales tax depending on their locality.

If you like this, perhaps you might be interested in some of my other fraktur such as my Birth/Baptismal/Marriage Certificates or paintings.

Right or Left Hand Carry?

What is right or left hand carry?  Simply, it is the side of the body on which a horn is intended to be worn.  Historically,  a curve of the tip to the left as viewed from the top is a right hand carry horn and also from the right side of the cow.   A curve of the tip to the right would historically  be a left hand carry horn and from the left side of the cow.   If there is no significant curve of the horn as viewed from the top, then the horn can be easily worn on either side with no conflict.   Most horns have so little curve it really doesn’t matter much and the modern pattern of carry is frequently opposite of the historical pattern.

Carrying a horn on the same side of the body as it came from the cow results in the tip pointing toward the body and the base pointing away from the body.   I also like the base of the horn to point to ward the body, as do many modern wearers, so I usually use the opposite side horn and rotate it about 90 degrees so that both the tip and the base of the horn point into the body.    This makes a horn from the left side of the cow into a powder horn you can carry on the right side of the body.     This is my personal preference, but not generally historically correct.  Historically,  powder horns were usually carried on the same side of the body as they came from on the cow.   If you want to be completely historically correct,  you need to understand that.

Sometimes a horn that is technically a left hand horn might wrap around the body better on the right hand side and vice versa.    So,  in describing a horn,  I will tell you whether a horn is historically a left hand or a right hand.  Then I will tell you on which side the horn was built to be carried,  if it is different.    I will also try to include a photo from the top of the horn so you can see the curve for yourself.     On which side you actually carry a horn, that is up to you.

Applied-tip Powder Horn with Fraktur Scrimshaw (Horn #46)

I am doing scrimshaw horns right now and this one is more traditional fraktur with geometric designs and stylized flowers.   I skipped the color on this one except for the ferric nitrate stain giving a little yellow color to the horn.

This right hand horn is 14″ around the outside curve and 11.5″ tip to tip, not including the stopper. The cherry base plug is 2.48″ in diameter.  The tip is horn and antler. The stopper is walnut.   While this is a traditional right hand horn.  the engraved panels are positioned so that they look right when the horn is worn on either side.

The bespoke price for a horn with a turned base plug and an applied-tip  is $250.   Scrimshaw is $200.   VA residents will have to pay an additional 5.3%  to 7% sales tax depending on their locality.

 If you would like this horn,  use the Contact page to get in touch with me and mention horn #46.

If you like this, perhaps you might be interested in some of my other fraktur such as my Birth/Baptismal/Marriage Certificates or paintings.

 

Horn #46 - An applied-tip powder horn with traditional fraktur scrimshaw - Outside
Horn #46 – An applied-tip powder horn with traditional fraktur scrimshaw – Outside

Horn #46 - An applied-tip powder horn with traditional fraktur scrimshaw - Inside
Horn #46 – An applied-tip powder horn with traditional fraktur scrimshaw – Inside

Horn #46 - An applied-tip powder horn with traditional fraktur scrimshaw - Top
Horn #46 – An applied-tip powder horn with traditional fraktur scrimshaw – Top

Horn #46 - An applied-tip powder horn with traditional fraktur scrimshaw - Bottom
Horn #46 – An applied-tip powder horn with traditional fraktur scrimshaw – Bottom

Right or Left Hand Carry?

What is right or left hand carry?  Simply, it is the side of the body on which a horn is intended to be worn.  Historically,  a curve of the tip to the left as viewed from the top is a right hand carry horn and also from the right side of the cow.   A curve of the tip to the right would historically  be a left hand carry horn and from the left side of the cow.   If there is no significant curve of the horn as viewed from the top, then the horn can be easily worn on either side with no conflict.   Most horns have so little curve it really doesn’t matter much and the modern pattern of carry is frequently opposite of the historical pattern.

Carrying a horn on the same side of the body as it came from the cow results in the tip pointing toward the body and the base pointing away from the body.   I also like the base of the horn to point to ward the body, as do many modern wearers, so I usually use the opposite side horn and rotate it about 90 degrees so that both the tip and the base of the horn point into the body.    This makes a horn from the left side of the cow into a powder horn you can carry on the right side of the body.     This is my personal preference, but not generally historically correct.  Historically,  powder horns were usually carried on the same side of the body as they came from on the cow.   If you want to be completely historically correct,  you need to understand that.

Sometimes a horn that is technically a left hand horn might wrap around the body better on the right hand side and vice versa.    So,  in describing a horn,  I will tell you whether a horn is historically a left hand or a right hand.  Then I will tell you on which side the horn was built to be carried,  if it is different.    I will also try to include a photo from the top of the horn so you can see the curve for yourself.     On which side you actually carry a horn, that is up to you.

Applied-tip Powder Horn with Color Fraktur (Horn #44)

I am doing more scrimshawed horns right now and trying some new things.  This is my latest effort featuring a Carolina parakeet and a Northern Cardinal along with some fraktur flowers.   I hope you like it.

This right hand horn is 14″ around the outside curve and 11.5″ tip to tip, not including the stopper. The cherry base plug is 2.29″ in diameter.  The tip is horn and antler. The stopper is walnut.   While this is a traditional right hand horn.  the engraved panels are positioned so that they look right when the horn is worn on either side.

The horn is colored with a little ferric nitrate prior to starting the engraving giving it a light yellow base. The ink is Windsor & Newton drawing ink. I finished up with some Tried and True oil on both the wood and horn followed by a coat of wax.

The bespoke price for a horn like this with a turned base plug and an applied-tip  is $250.   Scrimshaw is $200.   The color is another $100.  I collect the appropriate sales tax when shipped to a Virginia address.

If you like this, perhaps you might be interested in some of my other fraktur such as my Birth/Baptismal/Marriage Certificates or paintings.

Horn #44 - An applied-tip powder horn with color fraktur engraving of a Carolina parakeet and a Northern Cardinal- Top
Horn #44 – An applied-tip powder horn with color fraktur engraving of a Carolina parakeet and a Northern Cardinal- Top

Horn #44 - An applied-tip powder horn with color fraktur engraving of a Carolina parakeet and a Northern Cardinal- Inside
Horn #44 – An applied-tip powder horn with color fraktur engraving of a Carolina parakeet and a Northern Cardinal- Inside

Horn #44 - An applied-tip powder horn with color fraktur engraving of a Carolina parakeet and a Northern Cardinal- Bottom
Horn #44 – An applied-tip powder horn with color fraktur engraving of a Carolina parakeet and a Northern Cardinal- Bottom

Horn #44 - An applied-tip powder horn with color fraktur engraving of a Carolina parakeet and a Northern Cardinal- Outside
Horn #44 – An applied-tip powder horn with color fraktur engraving of a Carolina parakeet and a Northern Cardinal- Outside

Acorn Finial, Applied-tip Powder Horn #41 with Color Fraktur

This Virginia inspired powder horn has an applied Axis deer antler tip and turned black walnut base plug and stopper.  The base plug has an acorn finial which was common on Virginia powder horns.  The horn is technically a left hand horn, but is so straight it could be easily carried either way.    It was engraved assuming right hand carry.  It is about 13.5″ around the outside curve (not including the stopper), 11.5″ finial to tip, and with a 2.12″ diameter base plug.   The horn has been stained with ferric nitrate to give it a slightly yellow base.   Fraktur type engraving has been applied to the horn and the engraved designs colored with drawing ink.

The bespoke price for for a horn like this is $250 for the base horn (turned base plug with  applied tip).   Similar scrimshaw would be $200.   Color added to the horn would be another $100.  Then there is $25 shipping/insurance and any applicable Virginia sales tax.

If you like this, perhaps you might be interested in some of my other fraktur such as my Birth/Baptismal/Marriage Certificates or paintings.

Horn #41 - Virginia inspired powder horn with color fraktur engraving - Outside
Horn #41 – Virginia inspired powder horn with color fraktur engraving – Outside

Horn #41 - Virginia inspired powder horn with color fraktur engraving - Inside
Horn #41 – Virginia inspired powder horn with color fraktur engraving – Inside

Horn #41 - Virginia inspired powder horn with color fraktur engraving - Top
Horn #41 – Virginia inspired powder horn with color fraktur engraving – Top

Horn #41 - Virginia inspired powder horn with color fraktur engraving - Bottom
Horn #41 – Virginia inspired powder horn with color fraktur engraving – Bottom

Virginia “Acorn” Powder Horn #39

This is a powder horn that I have had on my build list a while and finally got around to doing it.   It is a recreation of a horn shown on pages 334-335 of Jay Hopkin’s book Bone Tipped & Banded Horns.   That horn was found in Virginia and the acorn is a Virginia motif.

The horn shown below is a technically a right hand horn, but is so straight it could be easily carried either way.    It is about 12.5″ around the outside curve (not including the stopper), 10.25″ finial to tip, and with a 1.96″ diameter base plug.   The screw-tip is horn and has a female thread as is typical on southern horns.   The base plug and stopper are American Black Walnut.

I hadn’t initially intended to put color fraktur/engraving on the horn.   However, the buyer asked if I could add a little something.    So,  I did.   I hope he likes it.    I have included photos of the horn both before and after the engraving.

The bespoke price for a horn like #39 is $280 for the base horn plus $25 shipping/insurance and applicable Virginia sales tax when shipped to a Virginia address.   The engraving is another $200 with the color being an additional $100 on top of that.  If you are interested, please use the Contact page to send me a note.   Make sure to include the horn number (#39).

If you like this, perhaps you might be interested in some of my other fraktur such as my Birth/Baptismal/Marriage Certificates or paintings.

Horn #39 - Virginia "Acorn" screw-tip powder horn - Outside
Horn #39 – Virginia “Acorn” screw-tip powder horn – Outside

Horn #39 - Virginia "Acorn" screw-tip powder horn - Inside
Horn #39 – Virginia “Acorn” screw-tip powder horn – Inside

Horn #39 - Virginia "Acorn" screw-tip powder horn - End
Horn #39 – Virginia “Acorn” screw-tip powder horn – End

Horn #39 - Virginia "Acorn" screw-tip powder horn - Tip
Horn #39 – Virginia “Acorn” screw-tip powder horn – Tip

Horn #39 - Virginia "Acorn" powder horn with color fraktur engraving - Top
Horn #39 – Virginia “Acorn” powder horn with color fraktur engraving – Top

Horn #39 - Virginia "Acorn" powder horn with color fraktur engraving - Outside
Horn #39 – Virginia “Acorn” powder horn with color fraktur engraving – Outside

Horn #39 - Virginia "Acorn" powder horn with color fraktur engraving - Bottom
Horn #39 – Virginia “Acorn” powder horn with color fraktur engraving – Bottom

Horn #39 - Virginia "Acorn" powder horn with color fraktur engraving - Inside
Horn #39 – Virginia “Acorn” powder horn with color fraktur engraving – Inside

Fur Trade Era Hunting Pouch with Fraktur Embroidery Insert

The Face of God Fraktur

I decided that I wanted to combine my fraktur (18th & 19th Century German-American folk art) work with my leather work in some way.   Some sort of embroidery seemed the most sensible way to do it.   So, I decided to create an original fraktur design hand embroidered on a canvas insert in the flap of a Fur Trade era hunting pouch.   This hunting pouch (#36) is the result of that idea.   This is not a strictly historically correct pouch.   I have taken some creative license to pursue my artistic interests in fraktur.

The fraktur is titled the Face of God; representative of Jesus Christ (in the form of the peacock) as the human face of the trinity  (in the form of three tulips on each branch of the tree of life stemming from the heart of God) and the model for our lives.   It is stitched on natural cotton duck canvas using cotton embroidery floss.   About half the time to complete this pouch is in the  execution of the fraktur.  More pouches with different original hand embroidered fraktur are to follow.  That art work will be featured here.

The pouch itself is the best that I know how to make.   It is hand stitched using waxed linen thread out of 2-3 oz (new pouches will have 6 oz leather straps) vegetable tan cowhide, fully lined with a period red print, and incorporating rolled welts, rolled bindings, and a flap lining of calfskin.   The pouch is 8 1/2″ x 9″ overall with a main storage area that is about 5″ x 8″.   There is an internal pocket for small items.  The strap passes through the top of the apron and is stitched inside the pouch for the cleanest possible appearance.  The strap can be adjusted via a brass buckle to a maximum of 57″ top of bag to top of bag.   I will make the strap accommodate any buyer.

As with all my leather work, the leather is stained with the period correct vinegar and iron for a blue-black to dark brown finish.   Mink oil is put on top of that.   I have not aged this pouch in any way.  The wrinkles in the leather are just from turning it.

This pouch is sold, but the bespoke price for a similar pouch with a one of a kind embroidered insert is $950 plus $25 shipping/insurance and the applicable Virginia sales tax if shipped to a Virginia resident.

If you like this, perhaps you might be interested in some of my other fraktur such as my Birth/Baptismal/Marriage Certificates or paintings.

Bag #36 - Fur Trade Era Hunting Pouch with embroidered fraktur insert.
Bag #36 – Fur Trade Era Hunting Pouch with embroidered fraktur insert – The Face of God.

Bag #36 - Fur Trade Era Hunting Pouch with embroidered fraktur insert - Front
Bag #36 – Fur Trade Era Hunting Pouch with embroidered fraktur insert – The Face of God.- Front

Bag #36 - Fur Trade Era Hunting Pouch with embroidered fraktur insert - Back
Bag #36 – Fur Trade Era Hunting Pouch with embroidered fraktur insert – The Face of God.- Back

Bag #36 - Fur Trade Era Hunting Pouch with embroidered fraktur insert - Inside
Bag #36 – Fur Trade Era Hunting Pouch with embroidered fraktur insert – The Face of God.- Inside

Bag #36 - Fur Trade Era Hunting Pouch with embroidered fraktur insert - Inside
Bag #36 – Fur Trade Era Hunting Pouch with embroidered fraktur insert – The Face of God.- Inside

The God of Peace and Love

This pouch (#38) is identical to the one above (#36) in all ways except for the fraktur insert.   The insert is hand embroidered on natural cotton duck canvas using French made cotton embroidery floss.   The design is entitled “The God of Peace and Love.”

Photos of Pouch #38 are shown below.

Bag #38- Fur Trade Era Hunting Pouch with embroidered fraktur insert – The God of Peace and Love – Front

Bag #38- Fur Trade Era Hunting Pouch with embroidered fraktur insert – The God of Peace and Love – Back

Bag #38- Fur Trade Era Hunting Pouch with embroidered fraktur insert – The God of Peace and Love – Front

Bag #38- Fur Trade Era Hunting Pouch with embroidered fraktur insert – The God of Peace and Love – Inside

Bag #38- Fur Trade Era Hunting Pouch with embroidered fraktur insert – The God of Peace and Love – Inside

A Pouch for My Brother

This hunting pouch (#40) was created just for my brother.   He wanted the first bag I created above (#36), but spoke up a little too late.  That bag went fast.  The followup fraktur embroidery that I did wasn’t all that appealing to him.  So,  I created this one.   It has a similar symbology to the first pouch with a single peacock, front and center,  representing Christ as the human face of God.  The three tulips represent the Trinity.  I have just included a photo of the flap.   The rest is pretty much the same as the bags above.

Bag #40- Fur Trade Era Hunting Pouch with embroidered fraktur insert – Front