Two Fraktur Decorated Applied-tip Powder Horns

Small Fraktur Decorated Applied-Tip Powder Horn (#52)

Horn #52 - Small Fraktur engraved applied-tip powder horn- Top
Horn #52 – Small Fraktur engraved applied-tip powder horn- Top
Horn #52 - Small Fraktur engraved applied-tip powder horn- Bottom
Horn #52 – Small Fraktur engraved applied-tip powder horn- Bottom

This small fraktur engraved powder horn (#52) is a traditional left hand carry that can be carried either way.   It is approximately 13.5″ around the outside curve and 10″ tip to tip not including the stopper.   The Cherry base plug is 2.25″ in diameter.   The two piece applied-tip is made of horn and Axis deer antler.   The stopper is Black Walnut.   The horn was lightly stained with ferric nitrate and finished with Tried and True (linseed oil and beeswax).  The horn weighs a little over 6 oz.

The bespoke price for a horn like this would be $415.  Sales tax will be collected for Virginia residents and shipping would be between $20-$25.    If you would like a horn like this,  use the Contact page to let me know and mention Horn #52.

If you like this, perhaps you might be interested in some of my other fraktur such as my Birth/Baptismal/Marriage Certificates or paintings.

Horn #52 - Small Fraktur engraved applied-tip powder horn- Outside
Horn #52 – Small Fraktur engraved applied-tip powder horn- Outside
Horn #52 - Small Fraktur engraved applied-tip powder horn- Inside
Horn #52 – Small Fraktur engraved applied-tip powder horn- Inside

Medium Fraktur Decorated Banded Applied-tip Powder Horn (#53)

Horn #53 - Medium Banded, Fraktur engraved, applied-tip powder horn- Top
Horn #53 – Medium Banded, Fraktur engraved, applied-tip powder horn- Top
Horn #53 - Medium Banded, Fraktur engraved, applied-tip powder horn- Bottom
Horn #53 – Medium Banded, Fraktur engraved, applied-tip powder horn- Bottom

This larger banded fraktur engraved powder horn (#53)is also a traditional left hand carry that can be carried either way.   It is approximately 16″ around the outside curve and 12.75″ tip to tip not including the stopper.   The Cherry base plug is 2.6″ in diameter and hollowed out about 3/4 of its length.   The two piece applied-tip is made of horn and Axis deer antler.   The stopper is Black Walnut.   The horn was stained light yellow with ferric nitrate and finished with Tried and True (linseed oil and beeswax).  The horn weighs a little under 8 oz.

This horn is available for sale for $340 plus $25 shipping and insurance.  The bespoke price for a horn like this would be $440.  Sales tax will be collected for Virginia residents.  If you would like this horn,  use the Contact page to let me know and mention Horn #53.

If you like this, perhaps you might be interested in some of my other fraktur such as my Birth/Baptismal/Marriage Certificates or paintings.

Horn #53 - Medium Banded, Fraktur engraved, applied-tip powder horn- Outside
Horn #53 – Medium Banded, Fraktur engraved, applied-tip powder horn- Outside
Horn #53 - Medium Banded, Fraktur engraved, applied-tip powder horn- Inside
Horn #53 – Medium Banded, Fraktur engraved, applied-tip powder horn- Inside

Right or Left Hand Carry?

What is right or left hand carry?  Simply, it is the side of the body on which a horn is intended to be worn.  Historically,  a curve of the tip to the left as viewed from the top is a right hand carry horn and also from the right side of the cow.   A curve of the tip to the right would historically  be a left hand carry horn and from the left side of the cow.   If there is no significant curve of the horn as viewed from the top, then the horn can be easily worn on either side with no conflict.   Most horns have so little curve it really doesn’t matter much and the modern pattern of carry is frequently opposite of the historical pattern.

Carrying a horn on the same side of the body as it came from the cow results in the tip pointing toward the body and the base pointing away from the body.   I also like the base of the horn to point to ward the body, as do many modern wearers, so I usually use the opposite side horn and rotate it about 90 degrees so that both the tip and the base of the horn point into the body.    This makes a horn from the left side of the cow into a powder horn you can carry on the right side of the body.     This is my personal preference, but not generally historically correct.  Historically,  powder horns were usually carried on the same side of the body as they came from on the cow.   If you want to be completely historically correct,  you need to understand that.

Sometimes a horn that is technically a left hand horn might wrap around the body better on the right hand side and vice versa.    So,  in describing a horn,  I will tell you whether a horn is historically a left hand or a right hand.  Then I will tell you on which side the horn was built to be carried,  if it is different.    I will also try to include a photo from the top of the horn so you can see the curve for yourself.     On which side you actually carry a horn, that is up to you.

Horn Containers

Shown below are two small engraved horn containers that I made as Christmas gifts. This is the first time I have made this sort of horn container. I had to make a larger mandrel to turn the 3″ plus diameter horn sections. I learned after the fact that I could have straightened taller horn sections on the mandrel. These are less than a couple inches high. I will try some taller containers next time.

I also had to learn to turn facework as I did not have centerwork stock big enough for the Black Walnut tops and bottoms. The tops are hollowed out a bit to give a little more room inside.

I have engraved the horn sections with the initials of the recipients. This is also the first time I have done such large block lettering on a horn. I had to outline the letters and then tediously crosshatch within the outlines. All in all, this was quite the learning experience.

I am glad to say, the gifts seemed to be well received.

Small engraved horn containers with Walnut tops and bottoms.
Small engraved horn containers with Walnut tops and bottoms
Small engraved horn containers with the Walnut tops off.
Small engraved horn containers with the Walnut tops off.

Fraktur Painted Blanket Chest

Given that my work fell off by about half this year due to the pandemic economic downturn,  I started to fill my time with personal projects.  This blanket chest has been on my personal project list for some time.    I finally got it finished.   This chest is approximately 50″ L x 24″ W x 28” H and is made up of six glued up pine panels.   It is assembled with hand cut dovetails.  The bottom, apron, and lid edges are all pegged in place.

The painted finish started with a deep red base of furniture paint.   That was then covered with a sponge applied black acrylic glaze.   The fraktur painted panels used acrylic gesso as a base.   The fraktur designs were painted in acrylic artist’s paints.

This item is not for sale and I do not intend to build another of this size.  However, I might be open to making a much smaller painted chest or box.  If you like this, perhaps you might be interested in some of my other fraktur such as my Birth/Baptismal/Marriage Certificates or paintings.

Artisan Book Series – Mark Elliott

I have been honored by the publication of a book about my life and work by the Contemporary Longrifle Association.  This book includes a longer  biography than I have included on this website and  high quality glossy color photos of my best work.   If you are a collector of my work, you will want to have this book to accompany your collection.

You can order the book for $20 directly from the Contemporary Longrifle Association at this link; https://store.longrifle.com/shop/cla-publications/artisan-book-series-mark-elliott/.

Early Virginia Powder Horn with Color Scrimshaw

Shown here is a bespoke powder horn with color scrimshaw.   The form of the horn is Early Virginia with a turned  beaded hard maple base plug and a turned Axis deer antler tip.  This right hand  horn is approximately 14.75″ around the outside curve, 12.25″ tip to tip, and with a 2.375″ diameter base plug.    Per the clients specification, the horn is engraved with a male and a female Cardinal, dogwood flowers, tobacco leaves and a cornucopia.   A little color was added to the birds.  The horn and base plug is stained with ferric nitrate and the entire horn finished in Tried & True (linseed oil and beeswax).

This horn is not available, but I can make you something like it.   Just contact me with your ideas and we can discuss it. The bespoke price for a horn like this one with a turned base plug and turned applied tip is $215.   Engraving is generally an extra $200.  Added color is $100.   Shipping on a single horn generally runs $20-$25.    Appropriate sales tax will be collected  for Virginia residents.

If you like this, perhaps you might be interested in some of my other fraktur such as my Birth/Baptismal/Marriage Certificates or paintings.

Horn #57 - Early VA Powder Horn with Color Scrimshaw showing a male Cardinal and dogwood flowers.
Horn #57 – Early VA Powder Horn with Color Scrimshaw showing a male Cardinal and dogwood flowers.

Horn #57 - Early VA Powder Horn with Color Scrimshaw showing a female Cardinal and a cornucopia.
Horn #57 – Early VA Powder Horn with Color Scrimshaw showing a female Cardinal and a cornucopia.

Right or Left Hand Carry?

What is right or left hand carry?  Simply, it is the side of the body on which a horn is intended to be worn.  Historically,  a curve of the tip to the left as viewed from the top is a right hand carry horn and also from the right side of the cow.   A curve of the tip to the right would historically  be a left hand carry horn and from the left side of the cow.   If there is no significant curve of the horn as viewed from the top, then the horn can be easily worn on either side with no conflict.   Most horns have so little curve it really doesn’t matter much and the modern pattern of carry is frequently opposite of the historical pattern.

Carrying a horn on the same side of the body as it came from the cow results in the tip pointing toward the body and the base pointing away from the body.   I also like the base of the horn to point to ward the body, as do many modern wearers, so I usually use the opposite side horn and rotate it about 90 degrees so that both the tip and the base of the horn point into the body.    This makes a horn from the left side of the cow into a powder horn you can carry on the right side of the body.     This is my personal preference, but not generally historically correct.  Historically,  powder horns were usually carried on the same side of the body as they came from on the cow.   If you want to be completely historically correct,  you need to understand that.

Sometimes a horn that is technically a left hand horn might wrap around the body better on the right hand side and vice versa.    So,  in describing a horn,  I will tell you whether a horn is historically a left hand or a right hand.  Then I will tell you on which side the horn was built to be carried,  if it is different.    I will also try to include a photo from the top of the horn so you can see the curve for yourself.     On which side you actually carry a horn, that is up to you.

Southern Banded Powder Horns

Southern Banded Powder Horns

On this page I have some southern  multi-banded powder horns.   These types of horns are typically found in North Carolina and south.  The single banded horns are covered on the Virginia Applied Tip Powder Horns page.   All these horns have applied tips with most being screw-tips.   If you see something you like,  use the Contact page to get in touch with me, and we can discuss making you a similar horn.

Horn #54 - Multi-banded southern style powder horn- Top
Horn #54 – Multi-banded southern style powder horn- Top

Horn #54 - Multi-banded southern style powder horn- Bottom
Horn #54 – Multi-banded southern style powder horn- Bottom

This medium sized horn (Horn #54) is a traditional right hand carry horn.   It is approximately 14 3/8″ around the outside curve and 12 1/4″ tip to tip not including the Walnut stopper.  The curly Maple base plug is approximately 2 3/4″ in diameter and is hollowed out better than half its length.  The horn weighs a little over 8 oz due to the very dense base plug.  The horn and base plug are stained with ferric nitrate and normally aged.

Horn #54 - Multi-banded southern style powder horn- Outside
Horn #54 – Multi-banded southern style powder horn- Outside

Horn #54 - Multi-banded southern style powder horn- Inside
Horn #54 – Multi-banded southern style powder horn- Inside

Horn #51 - VA inspired multi-banded powder horn- Top
Horn #51 – VA inspired multi-banded powder horn- Top

Horn #51 - VA inspired multi-banded powder horn- Bottom
Horn #51 – VA inspired multi-banded powder horn- Bottom

This medium to large sized horn (Horn #51) is a traditional left hand carry inspired by some Early Virginia horns shown in Jay Hopkin’s book Bone Tipped & Banded Horns.  While it is a traditional left hand carry,  it can be carried on the right.  It is 16″ around the outside curve and 12 3/4″ tip to tip not including the stopper.   The Black Walnut base plug is 2.72″ in diameter and hollowed out about 3/4 of its length.   There is also a Black Walnut stopper in the horn screw-tip.  There is no stain on the horn.  It is all finished with Tried & True (linseed oil and beeswax).     This horn is thin and translucent its entire length.  It weighs a little under 8 oz.

Horn #51 - VA inspired multi-banded powder horn- Outside
Horn #51 – VA inspired multi-banded powder horn- Outside

Horn #51 - VA inspired multi-banded powder horn- Inside
Horn #51 – VA inspired multi-banded powder horn- Inside

Horn #50 - NC inspired multi-banded powder horn- Top
Horn #50 – NC inspired multi-banded powder horn- Top

Horn #50 - NC inspired multi-banded powder horn- Bottom
Horn #50 – NC inspired multi-banded powder horn- Bottom

This medium sized horn (Horn #50) is a traditional right hand carry inspired by the horns found in North Carolina.   It is about 14″ around the outside curve and about 11 1/4″ tip to tip.  The walnut base plug  is 2 1/4″ in diameter hollowed out about 3/4 of it’s length.  The applied-tip is Axis deer antler.   The stopper is walnut.

 

 

 

Horn #50 - NC inspired multi-banded powder horn- Outside
Horn #50 – NC inspired multi-banded powder horn- Outside

Horn #50 - NC inspired multi-banded powder horn- Inside
Horn #50 – NC inspired multi-banded powder horn- Inside

Horn #47 - Southern multi-banded powder horn- Top
Horn #47 – Southern multi-banded powder horn- Top

Horn #47 - Southern multi-banded powder horn- Bottom
Horn #47 – Southern multi-banded powder horn- Bottom

This little horn (Horn #47) is a traditional left hand horn, but can be carried either way.    It is about 12″ around the outside curve and 10″ tip to tip.   The walnut base plug is 2.03″ in diameter and hollowed out about 3/4 of it’s length.  The applied-tip is Axis deer antler.  The stopper is walnut.

 

 

Horn #47 - Southern multi-banded powder horn- Outside
Horn #47 – Southern multi-banded powder horn- Outside

 

Horn #47 - Southern multi-banded powder horn- Inside
Horn #47 – Southern multi-banded powder horn- Inside

 

Horn #42 - Southern multi-banded powder horn- Top
Horn #42 – Southern multi-banded powder horn- Top

Horn #42 - Southern multi-banded powder horn- Bottom
Horn #42 – Southern multi-banded powder horn- Bottom

The following horn (Horn #42) is historically a right hand carry, but can easily be carried either way.   It is about 14″ finial to tip, not including the stopper,  around the outside curve.   Tip to tip it is 11.5″.  The base plug is 2.41″ in diameter.   The base plug is hollowed out about 3/4 of its length.  The Axis deer antler tip is pinned on.   The base plug and stopper are both Black Walnut.  There is a slight gap between the base band and the base plug, but it matches the grooves in the base plug.

 

Horn #42 - Southern multi-banded powder horn- Outside
Horn #42 – Southern multi-banded powder horn- Outside

Horn #42 - Southern multi-banded powder horn- Inside
Horn #42 – Southern multi-banded powder horn- Inside

The horn below is a particularly small one.   It is pretty straight and could easily be, historically, either a right or a left hand carry;  about 11″ around the outside curve staple to stopper.   The base plug is a little less than 2 1/4″ in diameter.   It has a screw-tip with a female thread.  The base plug is hollowed out about 3/4 of its length.

Horn #27 - A small multi-banded screw-tip powder horn.
Horn #27 – A small multi-banded screw-tip powder horn.

Horn #27 - A small multi-banded screw-tip powder horn.
Horn #27 – A small multi-banded screw-tip powder horn.

Horn #31 - Southern multi-banded, screw-tip powder horn - TopThe following horn (Horn #31) is historically a left hand carry, but is  setup as a right hand carry.   It can be carried either side without a problem.  It is about 13 1/2″ staple to stopper around the outside curve.   The base plug is a little less than 2 1/4″ in diameter.  It has a screw-tip with a female thread.  The base plug is hollowed out about 3/4 of its length.

 

Horn #31 - Southern multi-banded, screw-tip powder horn - Inside curve
Horn #31 – Southern multi-banded, screw-tip powder horn – Inside curve

Horn #31 - Southern multi-banded, screw-tip powder horn - Outside curve
Horn #31 – Southern multi-banded, screw-tip powder horn – Outside curve

Horn #32 - Southern multi-banded, screw-tip powder horn - TopThe following horn (Horn #32) is historically  a left hand carry, but is marked assuming a right hand carry.  It can be carried on either side.    It is about 15″ button to stopper around the outside curve.   The base plug is a little more than 2 3/8″ in diameter.  It has a screw-tip with a female thread.  The base plug is hollowed out about 1/2 of its length.  There  is  a slight gap between the base ring and the base plug, but the horn is air tight.   This horn is also a little on the heavy side at  7.4 oz.   All that being said,  this is still a very nice looking little horn.

Horn #32 - Southern Multi-banded, screw-tip powder horn - Inside Curve
Horn #32 – Southern Multi-banded, screw-tip powder horn – Inside Curve

Horn #32 - Southern Multi-banded, screw-tip powder horn - Outside Curve
Horn #32 – Southern Multi-banded, screw-tip powder horn – Outside Curve

Horn #33 - Southern multi-banded, applied -tip powder horn - Top
Horn #33 – Southern multi-banded, applied -tip powder horn – Top

The following horn (Horn #33) is a big one inspired by some early Virginia horns in Jay Hopkin’s book.  I think it would work well with my early Virginia shot pouch.  It is historically  a right hand carry, but I think it would work better as a left hand carry.    It can be carried on either side.    It is about 17″ button to stopper around the outside curve.   The base plug is a little more than 2 5/8″ in diameter.  It has an applied tip made up from horn and antler.   The base plug is hollowed out about 3/4 of its length.  This horn is actually very light weight for its size.  It weighs 6.8 oz.

Horn #33 - Southern multi-banded, applied -tip powder horn - Inside
Horn #33 – Southern multi-banded, applied -tip powder horn – Outside

Horn #33 - Southern multi-banded, applied -tip powder horn - Outside
Horn #33 – Southern multi-banded, applied -tip powder horn – Inside

All these multi-banded, applied tip horns are priced at $275 plus shipping for a bespoke horn.   Availability of any particular style, size or carry side of powder horn depends on my stock of raw horns.  If you see something you like,  use the Contact page to get in touch with me, and we can discuss making you a similar horn.

Shipping/insurance on a single multi-banded horn is $20 to $25  depending on destination withing the continental US.   VA residents will have to pay an additional 5.3%  to 7% sales tax depending on their locality.

Right or Left Hand Carry?

What is right or left hand carry?  Simply, it is the side of the body on which a horn is intended to be worn.  Historically,  a curve of the tip to the left as viewed from the top is a right hand carry horn and also from the right side of the cow.   A curve of the tip to the right would historically  be a left hand carry horn and from the left side of the cow.   If there is no significant curve of the horn as viewed from the top, then the horn can be easily worn on either side with no conflict.   Most horns have so little curve it really doesn’t matter much and the modern pattern of carry is frequently opposite of the historical pattern.

Carrying a horn on the same side of the body as it came from the cow results in the tip pointing toward the body and the base pointing away from the body.   I also like the base of the horn to point to ward the body, as do many modern wearers, so I usually use the opposite side horn and rotate it about 90 degrees so that both the tip and the base of the horn point into the body.    This makes a horn from the left side of the cow into a powder horn you can carry on the right side of the body.     This is my personal preference, but not generally historically correct.  Historically,  powder horns were usually carried on the same side of the body as they came from on the cow.   If you want to be completely historically correct,  you need to understand that.

Sometimes a horn that is technically a left hand horn might wrap around the body better on the right hand side and vice versa.    So,  in describing a horn,  I will tell you whether a horn is historically a left hand or a right hand.  Then I will tell you on which side the horn was built to be carried,  if it is different.    I will also try to include a photo from the top of the horn so you can see the curve for yourself.     On which side you actually carry a horn, that is up to you.

 

Late Flint Virginia Shot Pouch & Powder Horn

Late Flint VA Shot Pouch & Powder Horn
Pouch #16, Horn #14 – Late Flint VA Shot Pouch & VA Banded, Screw-tip Powder Horn

I made this shot pouch and powder horn for a Virginian headed south to the Texas fight for independence. It represents late flint pouch from the central Valley of Virginia, and is based on an example from Rockingham Co, VA as documented by Madison Grant in his book on hunting pouches. The horn is my standard Virginia, single banded, screw-tip powder horn.

 

This approximately 8″ x 8″ pouch is a three piece design of 3-4 oz vegetable tan cowhide consisting of a back, front, and flap. The back and flap are connected by a separate panel that is perforated at the top for the straps which are sewn inside. The pouch is not lined, as most original pouches were not, but it does include a small hanging pocket suitable for balls or other small items.  The bag is gusseted to increase the capacity; and all seams are welted which improves longevity. The flap and inside edge of the front panel are bound in goat or calf skin.  All my leather work is hand sewn with a saddle stitch using waxed linen thread.  The 6 oz  leather strap is 1″ wide and is adjusted with a plain forged iron buckle. There is also a leather keeper to keep the strap end neat. The pouch is stained with a vinegar and iron solution which results in a dark brown to blue/black color through the leather. This is a chemical stain; not a pigment. It will not wash out. The outside and part of the interior of the pouch is rubbed with Mink Oil and then brushed to protect the leather.

During the construction process, the leather and the finished pouch was distressed giving it a well broken in appearance. Almost all my work is slightly aged. Hopefully, those of you who are re-enactors will not be accused of being farb on my account.

Click and drag your mouse cursor horizontally across the image to spin the powder horn below. You can use you mouse wheel (scroll) to zoom in and out. You must zoom all the way out in order to spin the horn.
Shown below is a slightly larger version (approximately 9″x 9″) of the bag above made for a fowler paired with a plain southern powder horn.

Pouch 44/Horn 48 - Late Flint Virginia Shot Pouch with a Plain Southern Powder Horn.- Front
Pouch 44/Horn 48 – Late Flint Virginia Shot Pouch with a Plain Southern Powder Horn.- Front

Pouch 44/Horn 48 - Late Flint Virginia Shot Pouch with a Plain Southern Powder Horn.- Back
Pouch 44/Horn 48 – Late Flint Virginia Shot Pouch with a Plain Southern Powder Horn.- Back

You can obtain your very own pouch and horn outfit like the ones shown above for the following prices:

  • Late Flint Virginia Shot Pouch (as shown above) – $500 plus $25 shipping/insurance.
  • Powder Horn Hangers for Late Flint Virginia Shot Pouch – $15 (Option with a pouch order)
  • Add Decorative Tooling on the flap and front panel – $20 (Option with a pouch order)
  • A leather knife sheath added to the back or strap – $35 (Option with a pouch order – client must provide the knife)
  • Virginia Single Banded Screw-tip Powder Horn – $250 plus shipping
  • Plain Southern Horn – $150 plus shipping

Shipping on a single item is $15. Shipping on an outfit is $25. I will collect VA Sales Tax for items shipping to VA residents.

 

To order a pouch or horn like the ones shown above, or to discuss a different project, use the Contact form to send me an e-mail. See FAQ for more information on purchasing custom work.

Applied-tip Powder Horn with Color Fraktur (Horn #44)

I am doing more scrimshawed horns right now and trying some new things.  This is my latest effort featuring a Carolina parakeet and a Northern Cardinal along with some fraktur flowers.   I hope you like it.

This right hand horn is 14″ around the outside curve and 11.5″ tip to tip, not including the stopper. The cherry base plug is 2.29″ in diameter.  The tip is horn and antler. The stopper is walnut.   While this is a traditional right hand horn.  the engraved panels are positioned so that they look right when the horn is worn on either side.

The horn is colored with a little ferric nitrate prior to starting the engraving giving it a light yellow base. The ink is Windsor & Newton drawing ink. I finished up with some Tried and True oil on both the wood and horn followed by a coat of wax.

The bespoke price for a horn like this with a turned base plug and an applied-tip  is $215.   Scrimshaw is $200.   The color is another $100.  I collect the appropriate sales tax when shipped to a Virginia address.

If you like this, perhaps you might be interested in some of my other fraktur such as my Birth/Baptismal/Marriage Certificates or paintings.

Horn #44 - An applied-tip powder horn with color fraktur engraving of a Carolina parakeet and a Northern Cardinal- Top
Horn #44 – An applied-tip powder horn with color fraktur engraving of a Carolina parakeet and a Northern Cardinal- Top

Horn #44 - An applied-tip powder horn with color fraktur engraving of a Carolina parakeet and a Northern Cardinal- Inside
Horn #44 – An applied-tip powder horn with color fraktur engraving of a Carolina parakeet and a Northern Cardinal- Inside

Horn #44 - An applied-tip powder horn with color fraktur engraving of a Carolina parakeet and a Northern Cardinal- Bottom
Horn #44 – An applied-tip powder horn with color fraktur engraving of a Carolina parakeet and a Northern Cardinal- Bottom

Horn #44 - An applied-tip powder horn with color fraktur engraving of a Carolina parakeet and a Northern Cardinal- Outside
Horn #44 – An applied-tip powder horn with color fraktur engraving of a Carolina parakeet and a Northern Cardinal- Outside

 

Fur Trade Era Shot or Hunting Pouches

Golden Age of Hunting Pouches

Fur Trade Era Hunting Pouch - Pouch #29 - Full Front
Fur Trade Era Hunting Pouch – Pouch #29 – Full Front

For many years I have concentrated on 18th century shot pouches and simple mountain shot pouches.   These are generally small and of simple construction.   Some may have been made by harness makers but most were home made.    When we get to the 19th century,   the shot pouch or hunting pouch became a larger and more sophisticated affair more likely to have been professionally made.  The golden age of the hunting pouch coincides with the American Fur Trade era of about 1816 to 1850.

Fur Trade Era Hunting Pouch - Pouch #29 - Full Back
Fur Trade Era Hunting Pouch – Pouch #29 – Full Back

This page features two similar Fur Trade Era hunting pouches with some sophisticated features.   Both  pouches feature a fringed welt and rolled bindings. The rolled bindings are along the edge of the flap and along the inside of the opening at the top of the front of the pouch.   The welts go where the front and back of the pouch attach to the gusset.    Both pouches have a  small internal pocket and a period printed fabric lining.   Additionally,  the straps pass through the apron at the top of the bag and attach to the inside of the pouch.  Both bags are made of 2-3 oz vegetable tanned cowhide or calfskin and 3-4 oz  (new pouches have 6 oz straps)  leather straps.

A Medium Single Hunting Pouch

This medium size single (one compartment)  pouch is about 8″ x 10″ overall, including the fringe.    The working part of the pouch is about 7″ x 7″.   The strap can usually be made up to at least 60″ and is adjusted with a brass buckle.    The flap has a little tooling on it.   I just couldn’t help but add a little decoration of a few diagonal lines.  I hope you agree that the whole bag has a very neat and professional appearance.

As are all my leather products, this pouch is hand stitched with waxed linen thread.    This bag is stitched at 8 stitches per inch.    I have used my standard vinegar and iron stain for a dark brown to black finish.   The bag is slightly aged and distressed.

Fur Trade Era Hunting Pouch - Pouch #29 - Back
Fur Trade Era Hunting Pouch – Pouch #29 – Back

Fur Trade Era Hunting Pouch - Pouch #29 - Front
Fur Trade Era Hunting Pouch – Pouch #29 – Front

 

 

 

 

 

 

 

Fur Trade Era Hunting Pouch - Pouch #29
Fur Trade Era Hunting Pouch – Pouch #29

Fur Trade Era Hunting Pouch - Pouch #29 - Inside
Fur Trade Era Hunting Pouch – Pouch #29 – Inside

Fur Trade Era Hunting Pouch - Pouch #29 - Inside Pocket
Fur Trade Era Hunting Pouch – Pouch #29 – Inside Pocket

A Small Single Hunting Pouch

Pouch #30 - A small Fur Trade Era hunting pouch - Front
Pouch #30 – A small Fur Trade Era hunting pouch – Front

Shown here is a slightly smaller version of the bag above.  I actually like the shape a little better.

Pouch #30 - A small Fur Trade Era hunting pouch - Back
Pouch #30 – A small Fur Trade Era hunting pouch – Back

This small single (one compartment)  pouch is about 7.5″ x 8″ overall, including the fringe.    The working part of the pouch is roughly  6″ x 4.5″.   The main compartment is just a little bigger than my hand.  The strap is up to about 55″ top of bag to top of bag and is adjusted with a brass buckle.   The strap can be shortened, if necessary,  for the eventual owner.

As are all my leather products, this pouch is hand stitched with waxed linen thread.    This bag is stitched at 8 stitches per inch.    I have used my standard vinegar and iron stain for a dark brown to black finish.   The bag is slightly aged and distressed.

Pouch #30 - A small Fur Trade Era hunting pouch
Pouch #30 – A small Fur Trade Era hunting pouch

Pouch #30 - A small Fur Trade Era hunting pouch - Inside
Pouch #30 – A small Fur Trade Era hunting pouch – Inside

Pouch #30 - A small Fur Trade Era hunting pouch - Inside Pocket
Pouch #30 – A small Fur Trade Era hunting pouch – Inside Pocket

Bespoke Pricing for Similar Fur Trade Pouches

  • Single Fur Trade Pouch (like #29 or #30)- $550 plus $25 shipping/insurance
  • Leather Powder Horn Hangers – $15 (Option with a pouch order)
  • Leather knife sheath attached to back of pouch – $35 (Option with a pouch order – client must provide knife)

Use the Contact Form to let me know if you would like to have a pouch made like #29 or #30.