Simon Lauck Buck & Ball Gun

Simon Lauck Fowler - Full Right

 

Shown here is a an original signed Simon Lauck fowler.   The distinctive signature S_____ Lauck is shown in the last photo. I had originally believed that this gun was mostly a restoration.   However,  after a careful and detailed examination of the disassembled gun under expert guidance, I have come to believe that this gun is mostly original and a good example of a product of the Simon Lauck shop.

At some some point this gun was shortened and apparently converted to percussion.  Everything from the front thimble forward is a obvious restoration.  The stock from the front thimble back appears to be original and unaltered except for the repair of a crack through the lock mortise.  The lock appears to have been reconverted to flint, but I believe the lock plate is original to the gun because the lock screws fit the plate and the stock without any obvious modification.   I believe that the gap along the bottom of the lock plate is due to the repair through that area.   Some of the guard may be a replacement but it is hard to tell.

One important marking to mention is a very bold “LS” stamp on the bottom of the barrel at the breech.  I have been told that a barrel with this marking was also observed on a gun from the Haymaker shop.  It would seem that there was a barrel maker by the name of “LS” supplying the gun makers in Winchester around 1800. Some more research into this would certainly be in order.

  • Overall Length:  62″
  • Barrel Length:  46 13/16″

Simon Lauck Fowler - Full LeftSimon Lauck Fowler - TopSimon Lauck Fowler - BottomSimon Lauck Fowler - Half RightSimon Lauck Fowler - Half LeftSimon Lauck Fowler - Half Top

Simon Lauck Fowler - Half Bottom

Simon Lauck Fowler - Tang - a spear shaped tang with a silver thumb piece on the top of the wrist.Simon Lauck Fowler - Lock

Simon Lauck Fowler - Side Plate

Facebooktwitterredditpinterestlinkedinmail
Facebooktwitterlinkedinrss