Two Fraktur Decorated Applied-tip Powder Horns

Small Fraktur Decorated Applied-Tip Powder Horn (#52)

Horn #52 - Small Fraktur engraved applied-tip powder horn- Top
Horn #52 – Small Fraktur engraved applied-tip powder horn- Top
Horn #52 - Small Fraktur engraved applied-tip powder horn- Bottom
Horn #52 – Small Fraktur engraved applied-tip powder horn- Bottom

This small fraktur engraved powder horn (#52) is a traditional left hand carry that can be carried either way.   It is approximately 13.5″ around the outside curve and 10″ tip to tip not including the stopper.   The Cherry base plug is 2.25″ in diameter.   The two piece applied-tip is made of horn and Axis deer antler.   The stopper is Black Walnut.   The horn was lightly stained with ferric nitrate and finished with Tried and True (linseed oil and beeswax).  The horn weighs a little over 6 oz.

The bespoke price for a horn like this would be $450.  Sales tax will be collected for Virginia residents and shipping would be between $20-$25.    If you would like a horn like this,  use the Contact page to let me know and mention Horn #52.

If you like this, perhaps you might be interested in some of my other fraktur such as my Birth/Baptismal/Marriage Certificates or paintings.

Horn #52 - Small Fraktur engraved applied-tip powder horn- Outside
Horn #52 – Small Fraktur engraved applied-tip powder horn- Outside
Horn #52 - Small Fraktur engraved applied-tip powder horn- Inside
Horn #52 – Small Fraktur engraved applied-tip powder horn- Inside

Medium Fraktur Decorated Banded Applied-tip Powder Horn (#53)

Horn #53 - Medium Banded, Fraktur engraved, applied-tip powder horn- Top
Horn #53 – Medium Banded, Fraktur engraved, applied-tip powder horn- Top
Horn #53 - Medium Banded, Fraktur engraved, applied-tip powder horn- Bottom
Horn #53 – Medium Banded, Fraktur engraved, applied-tip powder horn- Bottom

This larger banded fraktur engraved powder horn (#53)is also a traditional left hand carry that can be carried either way.   It is approximately 16″ around the outside curve and 12.75″ tip to tip not including the stopper.   The Cherry base plug is 2.6″ in diameter and hollowed out about 3/4 of its length.   The two piece applied-tip is made of horn and Axis deer antler.   The stopper is Black Walnut.   The horn was stained light yellow with ferric nitrate and finished with Tried and True (linseed oil and beeswax).  The horn weighs a little under 8 oz.

This horn is available for sale for the reduced price of $375 plus $25 shipping and insurance.  The bespoke price for a horn like this would be $475.  Sales tax will be collected for Virginia residents.  If you would like this horn,  use the Contact page to let me know and mention Horn #53.

If you like this, perhaps you might be interested in some of my other fraktur such as my Birth/Baptismal/Marriage Certificates or paintings.

Horn #53 - Medium Banded, Fraktur engraved, applied-tip powder horn- Outside
Horn #53 – Medium Banded, Fraktur engraved, applied-tip powder horn- Outside
Horn #53 - Medium Banded, Fraktur engraved, applied-tip powder horn- Inside
Horn #53 – Medium Banded, Fraktur engraved, applied-tip powder horn- Inside

Right or Left Hand Carry?

What is right or left hand carry?  Simply, it is the side of the body on which a horn is intended to be worn.  Historically,  a curve of the tip to the left as viewed from the top is a right hand carry horn and also from the right side of the cow.   A curve of the tip to the right would historically  be a left hand carry horn and from the left side of the cow.   If there is no significant curve of the horn as viewed from the top, then the horn can be easily worn on either side with no conflict.   Most horns have so little curve it really doesn’t matter much and the modern pattern of carry is frequently opposite of the historical pattern.

Carrying a horn on the same side of the body as it came from the cow results in the tip pointing toward the body and the base pointing away from the body.   I also like the base of the horn to point to ward the body, as do many modern wearers, so I usually use the opposite side horn and rotate it about 90 degrees so that both the tip and the base of the horn point into the body.    This makes a horn from the left side of the cow into a powder horn you can carry on the right side of the body.     This is my personal preference, but not generally historically correct.  Historically,  powder horns were usually carried on the same side of the body as they came from on the cow.   If you want to be completely historically correct,  you need to understand that.

Sometimes a horn that is technically a left hand horn might wrap around the body better on the right hand side and vice versa.    So,  in describing a horn,  I will tell you whether a horn is historically a left hand or a right hand.  Then I will tell you on which side the horn was built to be carried,  if it is different.    I will also try to include a photo from the top of the horn so you can see the curve for yourself.     On which side you actually carry a horn, that is up to you.

Horn Containers

Shown below are two small engraved horn containers that I made as Christmas gifts. This is the first time I have made this sort of horn container. I had to make a larger mandrel to turn the 3″ plus diameter horn sections. I learned after the fact that I could have straightened taller horn sections on the mandrel. These are less than a couple inches high. I will try some taller containers next time.

I also had to learn to turn facework as I did not have centerwork stock big enough for the Black Walnut tops and bottoms. The tops are hollowed out a bit to give a little more room inside.

I have engraved the horn sections with the initials of the recipients. This is also the first time I have done such large block lettering on a horn. I had to outline the letters and then tediously crosshatch within the outlines. All in all, this was quite the learning experience.

I am glad to say, the gifts seemed to be well received.

Small engraved horn containers with Walnut tops and bottoms.
Small engraved horn containers with Walnut tops and bottoms
Small engraved horn containers with the Walnut tops off.
Small engraved horn containers with the Walnut tops off.

Early Virginia Powder Horn with Color Scrimshaw

Shown here is a bespoke powder horn with color scrimshaw.   The form of the horn is Early Virginia with a turned  beaded hard maple base plug and a turned Axis deer antler tip.  This right hand  horn is approximately 14.75″ around the outside curve, 12.25″ tip to tip, and with a 2.375″ diameter base plug.    Per the clients specification, the horn is engraved with a male and a female Cardinal, dogwood flowers, tobacco leaves and a cornucopia.   A little color was added to the birds.  The horn and base plug is stained with ferric nitrate and the entire horn finished in Tried & True (linseed oil and beeswax).

This horn is not available, but I can make you something like it.   Just contact me with your ideas and we can discuss it. The bespoke price for a horn like this one with a turned base plug and turned applied tip is $250.   Engraving is generally an extra $200.  Added color is $100.   Shipping on a single horn generally runs $20-$25.    Appropriate sales tax will be collected  for Virginia residents.

If you like this, perhaps you might be interested in some of my other fraktur such as my Birth/Baptismal/Marriage Certificates or paintings.

Horn #57 - Early VA Powder Horn with Color Scrimshaw showing a male Cardinal and dogwood flowers.
Horn #57 – Early VA Powder Horn with Color Scrimshaw showing a male Cardinal and dogwood flowers.

Horn #57 - Early VA Powder Horn with Color Scrimshaw showing a female Cardinal and a cornucopia.
Horn #57 – Early VA Powder Horn with Color Scrimshaw showing a female Cardinal and a cornucopia.

Right or Left Hand Carry?

What is right or left hand carry?  Simply, it is the side of the body on which a horn is intended to be worn.  Historically,  a curve of the tip to the left as viewed from the top is a right hand carry horn and also from the right side of the cow.   A curve of the tip to the right would historically  be a left hand carry horn and from the left side of the cow.   If there is no significant curve of the horn as viewed from the top, then the horn can be easily worn on either side with no conflict.   Most horns have so little curve it really doesn’t matter much and the modern pattern of carry is frequently opposite of the historical pattern.

Carrying a horn on the same side of the body as it came from the cow results in the tip pointing toward the body and the base pointing away from the body.   I also like the base of the horn to point to ward the body, as do many modern wearers, so I usually use the opposite side horn and rotate it about 90 degrees so that both the tip and the base of the horn point into the body.    This makes a horn from the left side of the cow into a powder horn you can carry on the right side of the body.     This is my personal preference, but not generally historically correct.  Historically,  powder horns were usually carried on the same side of the body as they came from on the cow.   If you want to be completely historically correct,  you need to understand that.

Sometimes a horn that is technically a left hand horn might wrap around the body better on the right hand side and vice versa.    So,  in describing a horn,  I will tell you whether a horn is historically a left hand or a right hand.  Then I will tell you on which side the horn was built to be carried,  if it is different.    I will also try to include a photo from the top of the horn so you can see the curve for yourself.     On which side you actually carry a horn, that is up to you.

Southern Banded Powder Horns

Southern Banded Powder Horns

On this page I have some southern  multi-banded powder horns.   These types of horns are typically found in North Carolina and south.  The single banded horns are covered on the Virginia Applied Tip Powder Horns page.   All these horns have applied tips with most being screw-tips.   If you see something you like,  use the Contact page to get in touch with me, and we can discuss making you a similar horn.

Horn #54 - Multi-banded southern style powder horn- Top
Horn #54 – Multi-banded southern style powder horn- Top

Horn #54 - Multi-banded southern style powder horn- Bottom
Horn #54 – Multi-banded southern style powder horn- Bottom

This medium sized horn (Horn #54) is a traditional right hand carry horn.   It is approximately 14 3/8″ around the outside curve and 12 1/4″ tip to tip not including the Walnut stopper.  The curly Maple base plug is approximately 2 3/4″ in diameter and is hollowed out better than half its length.  The horn weighs a little over 8 oz due to the very dense base plug.  The horn and base plug are stained with ferric nitrate and normally aged.

Horn #54 - Multi-banded southern style powder horn- Outside
Horn #54 – Multi-banded southern style powder horn- Outside

Horn #54 - Multi-banded southern style powder horn- Inside
Horn #54 – Multi-banded southern style powder horn- Inside

Horn #51 - VA inspired multi-banded powder horn- Top
Horn #51 – VA inspired multi-banded powder horn- Top

Horn #51 - VA inspired multi-banded powder horn- Bottom
Horn #51 – VA inspired multi-banded powder horn- Bottom

This medium to large sized horn (Horn #51) is a traditional left hand carry inspired by some Early Virginia horns shown in Jay Hopkin’s book Bone Tipped & Banded Horns.  While it is a traditional left hand carry,  it can be carried on the right.  It is 16″ around the outside curve and 12 3/4″ tip to tip not including the stopper.   The Black Walnut base plug is 2.72″ in diameter and hollowed out about 3/4 of its length.   There is also a Black Walnut stopper in the horn screw-tip.  There is no stain on the horn.  It is all finished with Tried & True (linseed oil and beeswax).     This horn is thin and translucent its entire length.  It weighs a little under 8 oz.

Horn #51 - VA inspired multi-banded powder horn- Outside
Horn #51 – VA inspired multi-banded powder horn- Outside

Horn #51 - VA inspired multi-banded powder horn- Inside
Horn #51 – VA inspired multi-banded powder horn- Inside

Horn #50 - NC inspired multi-banded powder horn- Top
Horn #50 – NC inspired multi-banded powder horn- Top

Horn #50 - NC inspired multi-banded powder horn- Bottom
Horn #50 – NC inspired multi-banded powder horn- Bottom

This medium sized horn (Horn #50) is a traditional right hand carry inspired by the horns found in North Carolina.   It is about 14″ around the outside curve and about 11 1/4″ tip to tip.  The walnut base plug  is 2 1/4″ in diameter hollowed out about 3/4 of it’s length.  The applied-tip is Axis deer antler.   The stopper is walnut.

Horn #50 - NC inspired multi-banded powder horn- Outside
Horn #50 – NC inspired multi-banded powder horn- Outside

Horn #50 - NC inspired multi-banded powder horn- Inside
Horn #50 – NC inspired multi-banded powder horn- Inside

Horn #47 - Southern multi-banded powder horn- Top
Horn #47 – Southern multi-banded powder horn- Top

Horn #47 - Southern multi-banded powder horn- Bottom
Horn #47 – Southern multi-banded powder horn- Bottom

This little horn (Horn #47) is a traditional left hand horn, but can be carried either way.    It is about 12″ around the outside curve and 10″ tip to tip.   The walnut base plug is 2.03″ in diameter and hollowed out about 3/4 of it’s length.  The applied-tip is Axis deer antler.  The stopper is walnut.

Horn #47 - Southern multi-banded powder horn- Outside
Horn #47 – Southern multi-banded powder horn- Outside

Horn #47 - Southern multi-banded powder horn- Inside
Horn #47 – Southern multi-banded powder horn- Inside

Horn #65 - Southern multi-banded powder horn - Top
Horn #65 – Southern multi-banded powder horn – Top

Horn #65 - Southern multi-banded powder horn - Bottom
Horn #65 – Southern multi-banded powder horn – Bottom

 The next horn (Horn #65) is a historically left hand horn carried on the right side so that it wraps around the body.    It is about 14 5/8″ finial to tip, not including the stopper,  around the outside curve.   Tip to tip it is 13″.  The base plug is about 2 5/8″ in diameter.   The base plug is hollowed out about 3/4 of its length.  The Axis deer antler tip and horn collar are pegged on.   The base plug and stopper are both Black Walnut.

Horn #65 - Southern multi-banded powder horn - Outside
Horn #65 – Southern multi-banded powder horn – Outside

Horn #65 - Southern multi-banded powder horn - Inside
Horn #65 – Southern multi-banded powder horn – Inside

The horn (#27) below is a particularly small one.   It is pretty straight and could easily be, historically, either a right or a left hand carry;  about 11″ around the outside curve staple to stopper.   The base plug is a little less than 2 1/4″ in diameter.   It has a screw-tip with a female thread.  The base plug is hollowed out about 3/4 of its length.

Horn #27 - A small multi-banded screw-tip powder horn.
Horn #27 – A small multi-banded screw-tip powder horn.

Horn #27 - A small multi-banded screw-tip powder horn.
Horn #27 – A small multi-banded screw-tip powder horn.

Horn #31 - Southern multi-banded, screw-tip powder horn - TopThe following horn (Horn #31) is historically a left hand carry, but is  setup as a right hand carry.   It can be carried either side without a problem.  It is about 13 1/2″ staple to stopper around the outside curve.   The base plug is a little less than 2 1/4″ in diameter.  It has a screw-tip with a female thread.  The base plug is hollowed out about 3/4 of its length.

Horn #31 - Southern multi-banded, screw-tip powder horn - Inside curve
Horn #31 – Southern multi-banded, screw-tip powder horn – Inside curve

Horn #31 - Southern multi-banded, screw-tip powder horn - Outside curve
Horn #31 – Southern multi-banded, screw-tip powder horn – Outside curve

Horn #32 - Southern multi-banded, screw-tip powder horn - TopThe following horn (Horn #32) is historically  a left hand carry, but is marked assuming a right hand carry.  It can be carried on either side.    It is about 15″ button to stopper around the outside curve.   The base plug is a little more than 2 3/8″ in diameter.  It has a screw-tip with a female thread.  The base plug is hollowed out about 1/2 of its length.  There  is  a slight gap between the base ring and the base plug, but the horn is air tight.   This horn is also a little on the heavy side at  7.4 oz.   All that being said,  this is still a very nice looking little horn.

Horn #32 - Southern Multi-banded, screw-tip powder horn - Inside Curve
Horn #32 – Southern Multi-banded, screw-tip powder horn – Inside Curve

Horn #32 - Southern Multi-banded, screw-tip powder horn - Outside Curve
Horn #32 – Southern Multi-banded, screw-tip powder horn – Outside Curve

Horn #33 - Southern multi-banded, applied -tip powder horn - Top
Horn #33 – Southern multi-banded, applied -tip powder horn – Top

The following horn (Horn #33) is a big one inspired by some early Virginia horns in Jay Hopkin’s book.  I think it would work well with my early Virginia shot pouch.  It is historically  a right hand carry, but I think it would work better as a left hand carry.    It can be carried on either side.    It is about 17″ button to stopper around the outside curve.   The base plug is a little more than 2 5/8″ in diameter.  It has an applied tip made up from horn and antler.   The base plug is hollowed out about 3/4 of its length.  This horn is actually very light weight for its size.  It weighs 6.8 oz.

Horn #33 - Southern multi-banded, applied -tip powder horn - Inside
Horn #33 – Southern multi-banded, applied -tip powder horn – Outside

Horn #33 - Southern multi-banded, applied -tip powder horn - Outside
Horn #33 – Southern multi-banded, applied -tip powder horn – Inside

All these multi-banded, applied tip horns are priced at $295 plus shipping for a bespoke horn.   Availability of any particular style, size or carry side of powder horn depends on my stock of raw horns.  If you see something you like,  use the Contact page to get in touch with me, and we can discuss making you a similar horn.

Shipping/insurance on a single multi-banded horn is $20 to $25  depending on destination withing the continental US.   VA residents will have to pay an additional 5.3%  to 7% sales tax depending on their locality.

Right or Left Hand Carry?

What is right or left hand carry?  Simply, it is the side of the body on which a horn is intended to be worn.  Historically,  a curve of the tip to the left as viewed from the top is a right hand carry horn and also from the right side of the cow.   A curve of the tip to the right would historically  be a left hand carry horn and from the left side of the cow.   If there is no significant curve of the horn as viewed from the top, then the horn can be easily worn on either side with no conflict.   Most horns have so little curve it really doesn’t matter much and the modern pattern of carry is frequently opposite of the historical pattern.

Carrying a horn on the same side of the body as it came from the cow results in the tip pointing toward the body and the base pointing away from the body.   I also like the base of the horn to point to ward the body, as do many modern wearers, so I usually use the opposite side horn and rotate it about 90 degrees so that both the tip and the base of the horn point into the body.    This makes a horn from the left side of the cow into a powder horn you can carry on the right side of the body.     This is my personal preference, but not generally historically correct.  Historically,  powder horns were usually carried on the same side of the body as they came from on the cow.   If you want to be completely historically correct,  you need to understand that.

Sometimes a horn that is technically a left hand horn might wrap around the body better on the right hand side and vice versa.    So,  in describing a horn,  I will tell you whether a horn is historically a left hand or a right hand.  Then I will tell you on which side the horn was built to be carried,  if it is different.    I will also try to include a photo from the top of the horn so you can see the curve for yourself.     On which side you actually carry a horn, that is up to you.

Applied-tip Powder Horn with Fraktur Scrimshaw (Horn #46)

I am doing scrimshaw horns right now and this one is more traditional fraktur with geometric designs and stylized flowers.   I skipped the color on this one except for the ferric nitrate stain giving a little yellow color to the horn.

This right hand horn is 14″ around the outside curve and 11.5″ tip to tip, not including the stopper. The cherry base plug is 2.48″ in diameter.  The tip is horn and antler. The stopper is walnut.   While this is a traditional right hand horn.  the engraved panels are positioned so that they look right when the horn is worn on either side.

The bespoke price for a horn with a turned base plug and an applied-tip  is $250.   Scrimshaw is $200.   VA residents will have to pay an additional 5.3%  to 7% sales tax depending on their locality.

 If you would like this horn,  use the Contact page to get in touch with me and mention horn #46.

If you like this, perhaps you might be interested in some of my other fraktur such as my Birth/Baptismal/Marriage Certificates or paintings.

 

Horn #46 - An applied-tip powder horn with traditional fraktur scrimshaw - Outside
Horn #46 – An applied-tip powder horn with traditional fraktur scrimshaw – Outside

Horn #46 - An applied-tip powder horn with traditional fraktur scrimshaw - Inside
Horn #46 – An applied-tip powder horn with traditional fraktur scrimshaw – Inside

Horn #46 - An applied-tip powder horn with traditional fraktur scrimshaw - Top
Horn #46 – An applied-tip powder horn with traditional fraktur scrimshaw – Top

Horn #46 - An applied-tip powder horn with traditional fraktur scrimshaw - Bottom
Horn #46 – An applied-tip powder horn with traditional fraktur scrimshaw – Bottom

Right or Left Hand Carry?

What is right or left hand carry?  Simply, it is the side of the body on which a horn is intended to be worn.  Historically,  a curve of the tip to the left as viewed from the top is a right hand carry horn and also from the right side of the cow.   A curve of the tip to the right would historically  be a left hand carry horn and from the left side of the cow.   If there is no significant curve of the horn as viewed from the top, then the horn can be easily worn on either side with no conflict.   Most horns have so little curve it really doesn’t matter much and the modern pattern of carry is frequently opposite of the historical pattern.

Carrying a horn on the same side of the body as it came from the cow results in the tip pointing toward the body and the base pointing away from the body.   I also like the base of the horn to point to ward the body, as do many modern wearers, so I usually use the opposite side horn and rotate it about 90 degrees so that both the tip and the base of the horn point into the body.    This makes a horn from the left side of the cow into a powder horn you can carry on the right side of the body.     This is my personal preference, but not generally historically correct.  Historically,  powder horns were usually carried on the same side of the body as they came from on the cow.   If you want to be completely historically correct,  you need to understand that.

Sometimes a horn that is technically a left hand horn might wrap around the body better on the right hand side and vice versa.    So,  in describing a horn,  I will tell you whether a horn is historically a left hand or a right hand.  Then I will tell you on which side the horn was built to be carried,  if it is different.    I will also try to include a photo from the top of the horn so you can see the curve for yourself.     On which side you actually carry a horn, that is up to you.

Acorn Finial, Applied-tip Powder Horn #41 with Color Fraktur

This Virginia inspired powder horn has an applied Axis deer antler tip and turned black walnut base plug and stopper.  The base plug has an acorn finial which was common on Virginia powder horns.  The horn is technically a left hand horn, but is so straight it could be easily carried either way.    It was engraved assuming right hand carry.  It is about 13.5″ around the outside curve (not including the stopper), 11.5″ finial to tip, and with a 2.12″ diameter base plug.   The horn has been stained with ferric nitrate to give it a slightly yellow base.   Fraktur type engraving has been applied to the horn and the engraved designs colored with drawing ink.

The bespoke price for for a horn like this is $250 for the base horn (turned base plug with  applied tip).   Similar scrimshaw would be $200.   Color added to the horn would be another $100.  Then there is $25 shipping/insurance and any applicable Virginia sales tax.

If you like this, perhaps you might be interested in some of my other fraktur such as my Birth/Baptismal/Marriage Certificates or paintings.

Horn #41 - Virginia inspired powder horn with color fraktur engraving - Outside
Horn #41 – Virginia inspired powder horn with color fraktur engraving – Outside

Horn #41 - Virginia inspired powder horn with color fraktur engraving - Inside
Horn #41 – Virginia inspired powder horn with color fraktur engraving – Inside

Horn #41 - Virginia inspired powder horn with color fraktur engraving - Top
Horn #41 – Virginia inspired powder horn with color fraktur engraving – Top

Horn #41 - Virginia inspired powder horn with color fraktur engraving - Bottom
Horn #41 – Virginia inspired powder horn with color fraktur engraving – Bottom

Virginia Single Banded, Applied-tip Powder Horn #40

This is a Virginia inspired, banded, applied-tip powder horn.    It is a left hand horn that may be worn on either side.   The tip is Axis deer antler.   The base plug and stopper are black walnut.   The horn has been dyed with ferric nitrate and gently aged.    The horn is 13″ around the outside curve and 11″ tip to tip not including the stopper.    The base plug is  about 1 15/16″ in diameter.

A similar horn may be  ordered  for $275 plus $25 shipping/insurance and any applicable Virginia sales tax for Virginia residents.  Use the Contact page to send me an e-mail if you are interested in having a horn made like Horn #40.

Horn #40 - Virginia banded, applied-tip powder horn- Inside
Horn #40 – Virginia banded, applied-tip powder horn- Inside

Horn #40 - Virginia banded, applied-tip powder horn- Outside
Horn #40 – Virginia banded, applied-tip powder horn- Outside

Horn #40 - Virginia banded, applied-tip powder horn- Top
Horn #40 – Virginia banded, applied-tip powder horn- Top

Horn #40 - Virginia banded, applied-tip powder horn- Bottom
Horn #40 – Virginia banded, applied-tip powder horn- Bottom